Equipos Disponibles - Single Station

Equipos Nuevos

Advertise or Browse Single Station

• • IEC# 117894 - AAA Single Station Thermoformer, Model Mb 4872,48x72 Max Mold Size
    Upper And Lower Platens,Upper And Lower Multizone Ceramic Oven
    Automatic Vacuum Forming.Vacuum Pump With Tank,Automatic Controls
    Auto Air Clamp Frame,480 Volt /3ph/ 180...
    For Information...
  • IEC# 119665 - Single Station Thermoformer mfg. EMC. This unit was built in 1985 and has a maximum of 96” x 192” for a female mold. It requires 460 volts- 700 amps of service. There are two ovens with 14 zones each with percentage meters, that are also chain...
    For Information...
  • IEC# 118711 - Comet Single Station Thermoformer • Model: Star • Max. Mold Size: 60"" X 96"" • Top Platen - Motor Driven • 42"" Stoke • Bot Platen • Motor Driven • 36"" Stroke • Top And Bottom Ceramic Ovens • 7 Zones Top And 7 Zones Bottom • Vacuum Tank/Pump •...
    For Information...
  • IEC# 118090 - -ARMAC - Single Station Vacuum Forming Press- -MN: 3030LV -6 Panel Heaters -4 Controled Heating Zones -Top Oven Only -Automated roll feed system with chain rails. -Vacuum pump included -480 V Power Supply -In good working condition -6"...
    For Information...
  • IEC# 119666 - Single Station Vacuum Former, 26” x 52” mfg. Formech. This unit is a model FM-1 built in 1999. The maximum mold size is 26” x 52” and features a top heat multizone ceramic oven. The unit also features a self contained vacuum system, bottom platen,...
    For Information...
  • IEC# 119658 - CAM 4’ x 5’ Single Station Thermoformer. This unit features a forming area of 4’ x 5’ with top and bottom calrod heaters and dual heavy duty platens. PLC controls. Currently powered and in good working condition.
    For Information...
  • IEC# 119660 - 24x36 Pressure/Vacuum Thermoformer mfg. Labform. Model 2436-3, forming area is 24x36 and this unit can be pressure or vacuum forming. This unit also features 10” air cylinders with 480 volt/3 phase 50 Amp.
    For Information...
  • IEC# 119659 - APM 4872 50” x 72” Pressure Former with dual platens. This unit features a 50” x 72” forming area with a max sheet size of 55 3/4" by 75 3/4". Bottom Platen Stroke is 30” (daylight 37 ½”) and top platen stroke is 48” (daylight 55 ½”). This unit...
    For Information...
  • IEC# 118712 - Used Brown/Modern 5 X 10 Single Station • Pressure Thermoforming Machine • 60"X 120"Thermoformer With Hydraulic Pressure Forming • Oven -72" X 132" Solar • The Oven Is Fitted With 66 Of The 12" X 24" Solar Panel Heaters Of The Latest Technology And
    For Information...
  • IEC# 118091 - -USED DRYPOLL VACUUM-PRESSURE THERMOFORMER -MODEL LP-3 -36" X 48" MAX MOLD SIZE -TOP AND BOTTOM CERAMIC MULTI ZONE OVENS -TOP AND BOTTOM MOVING PLATENS -VACCUM OR PRESSURE FORMING -MAX PART DEPTH 18" -MICROPROCESS PR CONTROLLED -AUTOMATIC...
    For Information...
  • IEC# 118783 - ZMD Fully Automatic Vacuum Forming Machine With 24" x 36" Top Shuttle Heater, 12 Zones. 4,000 Cfm. Vacuum. 12 Gallon Tank For Quick Recovery. Pneumatic Clamps. 12" Stroke On Bottom Platen. Quick Cooling fan. Runs on 230 3 Phase Power & 1 110...
    For Information...
  • IEC# 119663 - Single Station Thermoformer mfg. Lyle. Model 4 x 8 with a 48” x 96” maximum mold size. This unit features top and bottom calrod ovens with top and bottom moving platens. Automatic air actuated clamp system, and 24" depth of draw.
    For Information...
  • IEC# 118092 - -MIII MODEL 405 SINGLE STATION THERMOFORMER -NEW 1984 -44 X 60 MOLD AREA -ALLEN BRADLEY MICROPROCESSOR -DUAL CALROD HEATERS -DUAL MOVING PLATENS -BUILT TO REPLICATE THE BROWN MODULAR SERIES -MACHINE IS IN GOOD WORKING ORDER -VIDEO IS...
    For Information...
  • IEC# 119662 - 36” x 60” Single Station Thermoformer mfg. Brown. Model 1533, and constructed in 1997, this unit has an automatic material feeder/cutter as well as dual heat ceramic ovens and dual platens.
    For Information...
  • IEC# 119661 - 36” x 36 forming area Vacuum Thermoformer. This unit is a HD-300 series with 24” bottom platen stroke and 24” top platen stroke (36” top platen daylight). Built of tubular steel, this unit features a Busch R5 powerful vacuum pump with quiet...
    For Information...
  • IEC# 119664 - Single Station Thermofomer mfg. APM. This unit is a model 2424 SHSP which was built in 2000 and has a 24" x 24" maximum mold size. The top oven has two heat zones. The unit also features bottom platen, adjustable clamping, vacuum pump and a vacuum...
    For Information...
  • IEC# 117963 - Comet, Model LABMASTER, 24" X 24" FORMING AREA 26" X 26" max sheet size, adjustable clamp frame, semi automatic operation, self contained vacuum pump and tank. Top oven calrod, bottom oven calrod.
    For Information...